Connections must be made with the power turned off. Please be aware that careless operation may damage your
speaker system or cause malfunctions.
Pedal connections etc.
Connections to MIDI equipment
Connecting audio equipment
Here's how to connect the microSTATION to your
analog amp or mixer.
If you've connected a stereo audio amp, be aware
that playing at high volume may damage your
speaker system. Be careful not to raise the volume
OUTPUT L/MONO and R
All of the factory sounds use these outputs.
1. Connect the OUTPUT L/MONO and R outputs to
the inputs of your powered monitor or mixer.
If you're using the microSTATION in stereo, use
both the L/MONO and R jacks. If you're using the
microSTATION in mono, use only the L/MONO
If you're playing back through a stereo audio amp
or a cassette recorder that has an external input jack,
connect the microSTATION to the jacks(s) labeled
LINE IN, AUX IN, or external input. (Use an
adapter cable with the appropriate type of plug.)
Connections to computers
Analog audio output
1. If you're using headphones, connect them to the
microSTATION's headphone jack.
2. Use the VOLUME slider to adjust the volume of
The microSTATION's headphone jack outputs the
same signal as the OUTPUT L/MONO and R jacks.
AC adapter power
to an AC outlet
Connecting the AC adapter