JVC KY-F560 Sales Manual page 44

KY-F550 Auto Shading Compensation System
0 1 2
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
A<B:To increase parameter
A>B:To decrease parameter
A=B:Not to change parameter(based on the same judgment system with AW)
After finishing operation, the message will appear on screen.
OK:Completed
Low light/Over light:Same condition with AW detection
Object:When the deviation between max value and minimum value of APL of each block in
each channel of each A and B area is more than 5%. Or, when it cannot be detected even if
parameter was set to maximum value or minimum value.
3 4 5 6
A
B
7
Auto shading compensation
system is to compensate the
white shading near the border of
two pictures occurred by
interference automatically.
This system works to adjust the
parameter of shading
automatically to equalize the
APL of area "A" and area"B" in
each RGB channels.
Ver1.1
44