JVC KY-F560 Sales Manual page 16

Comparison of PTZ system between KY-F560 & AW-E600
Configuration
Camera
Lens
PTZ housing
Controller
Power supply
Zoom, Focus
and PT levers
Menu setting
Tally
indication
Shutter mode
Genlock
Speed
override
Iris
adjustment
Cable clamp
Scene file
ABC
ATW memory No ATW memory
Tally
indication on
controller
JVC
KY-F560
YH19x6.7KTS
CPT-70F-02A/UTB-219A-02A
UTU-427D-01
E0P-102J-60B
JVC
Power is supplied via exclusive multi core cable from
AC adapter. The connector of this cable is reliable with
lock mechanism and easy to connect and disconnect.
The style of levers for Zoom, Focus and Pan/Tilt are
different each other and is easy to operate
ergonomically.
Menu cannot be adjusted from remote controller, but it
is possible to set locally without any restriction.
Optional tally is located at the top of PTZ and is large
and visible from every direction regardless of the
position of camera. Tally signal line is included in the
multi core cable and no necessary to connect another
line.
Shutter modes can be selected from controller except
1/100(120) mode.
Genlock can be adjusted locally only.
Manual operation is only possible to adjust the speed
of each levers.
Manual iris can be adjusted by button step by step.
No cable clamp adjustment
No scene file on conreoller.
No ABC function.
No tally indication on controller.
Pana
AW-E600
YH19x6.7KTS
AW-PH300A
AW-RP501
Pana
Power is supplied via simple twist pair cable from AC
adapter. But, this cable looks cheap and is unreliable
without any connector and is recommended to be fixed
by soldering.
The style of levers for Zoom, Focus and Pan/Tilt is
completely identical and easy to misoperate.
Menu cannot be adjusted from remote controller.
Moreover, if remote interface cable is connected, it
also does not work. In order to set menu locally, it is
necessary to provide power from another AC adapter.
It is very incovenient.
Provided tallies are located at the front and back of
PTZ. But, both are too small and may not be visible
when the camera covers it. And, it is required to
connect another lines.
Shutter select items are 1/100(120) and EEL only from
controller.
Genlock can be adjusted from controller.
Speed select switch is useful to control each levers at
lower or higher speed smoothly.
Manual Iris can be adjusted by volume variably and
smoothly.
Cable clamp adjustment is possible.
4 scene file memories are available on controller.
ABC can be controlled from controller.
2 ATW memories are available on controller.
Tally indication can be confirmed on controller.
Ver1.1
16