JUKI DDL-8700 Instruction Manual page 27

7 Sound of click of the key switch mounted on the PSC box (Function setting No. 11)
This function selects whether the sound is effective or ineffective when operating the four key switches
mounted on the PSC box.
1 1
8 Optional switch function selection (Function setting No. 12) : It is used only when it is combined with
the machine head provided with the optional switch.
Functions to be assigned to the optional switch can be selected from the following functions.
1 2
9 Sewing counting function (Function setting No. 14)
The function counts up every time thread trimming is completed and counts the number of completion of the
sewing process.
This can be realized together with the CP-160 control panel. Refer to the explanation of the control panel.
1 4
(Caution) Setting will be invalid when the material end sensor is not attached, or CP-160 control
panel is connected.
!0 Neutral automatic presser lifting function (with AK device only) (Functionsetting No. 21)
This function can automatically lift the presser foot when the pedal is in the neutral position.
Automatic lifting time of the pedal depends on the automatic lifting time after thread trimming and when the
presser foot is automatically lowered, it is automatically lifted at the second neutral position after it has come
off the neutral position once.
2 1
0 : off The sound of click is ineffective.
1
1 : on The sound of click is effective.
0 : No function (Standard setting)
0
1 : Needle up / down compensating stitching : Every time the switch is pressed,
normal feed stitching by half stitch is performed. (Same operation as that of
up / down compensating stitching switch on the panel.)
2 : Back compensating stitching : Reverse feed stitching is performed at low
speed while the switch is held pressing. (It is effective only when constant
dimension sewing pattern is selected with the CP-160.)
3 : Function of canceling once reverse feed stitching at the end of sewing : By
depressing the back part of the pedal after pressing the switch, operation of
reverse feed stitching is canceled once.
4 : Thread trimming function : This function is actuated as the thread trimming
switch.
5 : Presser foot lifting function : This function is actuated as the foot lifter switch.
6 : One stitch compensating stitching : Every time the switch is pressed, one
stitch stitching operation is executed.
7 : Function of simultaneously canceling reverse feed stitching at the start and
end of sewing : By operating the optional switch, ineffective/effective can
be alternately changed over.
8 : Presser foot lifting function when pedal is neutral : Every time the switch is
pressed, the function whether automatically lifting the presser foot when
the pedal is neutral or not can be selected.
(Note) Indication 1 of reverse feed stitching
at the start and end of sewing on the
operation panel is the same even
when the function is canceled. So, be
careful.
1 : on Sewing counting function is operative.
1
0 : off Sewing counting function is inoperative.
(Indication on the CP-160 contorl panel will go out as well.)
0 : off Function of neutral automatic presser lifting is not operative.
0
1 : on Selection of function of neutral automatic presser lifting
25
1