JUKI DDL-8700 Instruction Manual page 25

No.
Item
Change-over
Initial speed when starting reverse feed stitching at the sewing end
speed of EBT
64
(end back tack)
Function of soft-
Presser foot is slowly lowered.
down of presser
0 : Presser foot is rapidly lowered.
70
foot
1 : Presser foot is slowly lowered.
Function of
Speed limitation is performed at the time of re-acceleration on the way
limitation of re-
of reducing speed of the sewing machine.
acceleration from
It is effective when operating inching sewing.
71
reduction of
speed
Function of
Speed limitation is performed at the time of start-up of the sewing
limitation of
machine (excluding the start of sewing).
acceleration at
It is effective when operating inching sewing.
72
the start of
rotation
Retry function
This function is used when needle cannot pierce materials .
0 : Normal
73
1 : Retry function is provided.
Rotating direction
Normal rotating direction of motor
of motor
0 : Clockwise
75
*
1 : Counterclockwise
One-shot
One-shot automatic stitching up to end of material is performed. (Used
function up to
in case of without panel)
76
end of material
0 : Without one-shot function
1 : With one-shot function
Suction motion time of presser lifter solenoid
Presser lifter
50 to 300 ms
solenoid initial
84
*
motion suction
time
Function of
Pedal curve is selected. (Improving pedal inching operation)
pedal curve
selection
Number of rotations
87
Tension
It is effective in combination with the machine head provided with tension
release
release function.
89
*
function
0 : Tension release function is ineffective.
1 : Tension release function is effective.
Function of
Function of compensating stitching when turning handwheel by hand at
prohibiting
the time of completion of constant-dimension stitching
compensation
0 : Function of compensating stitching is effective.
91
*
operation after
1 : Function of compensating stitching is prohibited.
turning
handwheel by
hand
Function of
Function to reduce speed at the time of completion of reverse feed
reducing speed
stitching at the start of sewing.
of reverse feed
0 : Speed is not reduced.
92
stitching at the
1 : Speed is reduced.
start of sewing
Function added
Operation of needle up/down compensating switch is changed after
to needle up/
turning ON the power or thread trimming.
down
0 : Normal (needle up/down compensating stitching only)
93
compensating
1 : One stitch compensating stitching is performed only when
switch
Manufacturer's
Do not change the set value.
function
* 94 It is very dangerous to change the set value since it causes damage to
the machine.
Max. number of
Max. number of rotation of the sewing machine head can be set.
96
rotation setting
* Setting varies in accordance with resistance pack to be connected.
* Do not change the set values with asterisk (*) mark as they are functions for maintenance. If the standard set value set at the
time of delivery is changed, it is in danger of causing the machine to be broken or the performance to be deteriorated.
If it is necessary to change the set value, please purchase the Engineer's Manual and follow the instructions.
(Descriptions of setting in this list are the standard values at the time of delivery of DDL-8700.)
However, contents of function setting are subject to change for improvement of function and performance without notice.
Description
2
0
aforementioned changeover is made. (Upper stop ıî upper stop)
1
Pedal stroke
23
Indication of
Setting range
function setting
0 to 250
6 4
(r.p.m.)
0/1
7 0
0 to 5
7 1
7 2
0 to 5
7 3
0/1
7 5
0/1
7 6
0/1
50 to 300
8 4
(ms)
0/1/2 8 7
0/1
8 9
0/1
9 1
0/1
9 2
0/1
9 3
9 4
0/1
150 to MAX
9 6
4
(rpm)
Ref.
page
1 8 0
0
30
0
30
0 30
1
31
1
0 31
2 5 0
0
31
0
1
0
30
31
0
0
0 0 0
31