JUKI DDL-8700 Instruction Manual page 17

6
2
1
(2) Overlapped stitching pattern
Overlapped stitching patterns below can be set by using the operation panel.
C
A
B B
D
Reverse stitching pattern
2
1
2
1
8
3
4
C
Overlapped stitching pattern
2
1
3
4
5) Press /
stitches display 6 flash on and off, and set the
number of stitches for the respective processes of
the stitching.
switch 3 or
6) Press
change the number of stitches.
The number of stitches can be changed up to as
many as 15 stitches for the A, B, C, and D
processes respectively.
However, displays are as follows.
10 stitches = A, 11 stitches = b, 12 stitches = c, 13
stitches = d, 14 stitches =E and 15 stitches = F
7) When the setting of all items has been completed,
press /
contents of the setting. (Flashing stops.)
A : Number of stitches of normal stitching setting
0 to 15 stitches
B : Number of stitches of reverse stitching setting
0 to 15 stitches
C : Number of stitches of normal stitching setting
0 to 15 stitches
D : Number of times of repetition
0 to 9 times
(Caution) When process D is set to 5 times, the
sewing is repeated as A / B / C / B / C.
[Setting procedure of the overlapped stitching]
1) Hold pressing
switch 2 to select the overlapped stitching
/
pattern.
(Every time
reverse stitching pattern/overlapped stitching
pattern change over alternately.)
2) The number of stitches for process A becomes in
flashing state.
3) Every time /
flashing position shifts in the right direction and the
display of the process where setting can be
changed flashes on and off.
switch 3 or
4) Press
change the number of stitches.
5) When the setting of all processes has been
completed, press
determine the contents of the setting. (Flashing
stops.)
(Caution) When the overlapped stitching is
selected, the automatic operation display
flashes on and off. It is not possible to
release the automatic operation.
15
switch 1 to make number of
switch 4 to
switch 2 to determine the
/ switch1, and press
switch 2 is pressed,
/
switch 1 is pressed, the
switch 4 to
switch 2 to
/