Download  Print this page

Fujitsu Inverter Halcyon 9374379378 Operating Manual page 5

Cassette type
Hide thumbs

Advertisement

To set the operation mode
G Operation mode setting
G Room temperature setting
Lower
Rise
G Fan speed setting
ECONOMY OPERATION
Room temperature sensor selection
Press the ECONOMY button for more than 2 seconds to
select whether the room temperature is detected at the in-
door unit (remote sensor) or the remote controller.
When the
thermo sensor display appears, the room
temperature is detected at the remote controller.
NOTES
• This function is locked at the factory. In order to detect the room temperature correctly, consult authorized service
personnel when using this function.
• If this function is locked, the location where the room temperature is detected cannot be changed and the
mark flashes when the ECONOMY button is pushed for 2 seconds or more.
08M516_9374379378_en
Press the MODE button to set the operation mode.
If DRY is selected, the fan speed will be set to AUTO.
AUTO
COOL
Press the SET TEMP. buttons to set the room temperature.
Temperature setting range
AUTO ............................................... 64 to 88 °F
COOL/DRY ....................................... 64 to 88 °F
HEAT ................................................ 60 to 88 °F
Press the FAN button to set the fan speed.
AUTO
HIGH
Press the ECONOMY button to start or stop ECONOMY OPERA-
TION.
For details on the function, refer to page 13.
4
DRY
FAN
HEAT
MED
LOW
QUIET
Indoor unit
2009.01.19, 14:09
En-4

Advertisement

loading

  Related Manuals for Fujitsu Inverter Halcyon 9374379378