ADJUSTING THE DIRECTION OF AIR CIRCULATION
Instructions relating to heating (*) are applicable only to "HEAT & COOL MODEL" (Reverse Cycle).
Start air conditioner operation before performing this procedure.
To set the operation mode
G Vertical air direction adjustment
Each time the button is pressed, the air direction range will change as follows:
The remote control unit's display does not change.
Recommended Air Flow Direction Setting:
1, 2, 3, 4: During Cooling/Dry mode
2, 3, 4:
During Heating mode
G The vertical airflow direction is set automatically as shown, in accordance with
the type of operation selected.
During Cooling/Dry mode : Horizontal flow 1
*During Heating mode
G During AUTO mode operation, for the first minute after beginning operation,
airflow will be horizontal 1; the air direction cannot be adjusted during this
G Horizontal air direction adjustment.
The function cannot be used.
Begin air conditioner operation before performing this procedure.
To select/stop swing operation
About Swing Operation
The type of operation
* Press the START/STOP button to start the air conditioner, and then pro-
ceed as follows.
Press the VERTICAL AIRFLOW DIRECTION and SWING button to adjust
the direction of the vertical airflow.
: Downward flow 4
Press the VERTICAL AIRFLOW DIRECTION and SWING button for more
than 2 seconds. (Stop the setting by pressing for more than 2 seconds
Range of swing
1 to 4
2 to 4
G Attempting to move up/down air di-
rection flaps manually could result
in improper operation; in this case,
stop operation and restart. The
louvers should begin to operate
G When used in a room with infants,
children, elderly or sick persons, the
air direction and room temperature
should be considered carefully when
G The SWING operation may stop temporarily when the air
conditioner's fan is not operating, or when operating at
very low speeds.