Download  Print this page

Adjusting The Direction Of Air Circulation - Fujitsu Inverter 9374379446 Operating Manual

Floor/ceiling type
Hide thumbs

Advertisement

Table of Contents

ADJUSTING THE DIRECTION OF AIR CIRCULATION

Instructions relating to heating (*) are applicable only to "HEAT & COOL MODEL" (Reverse Cycle).
● Adjust the up, down, left and right AIR directions with the AIR DIRECTION buttons on the Remote Controller.
● Use the AIR DIRECTION buttons after the Indoor Unit has started operating and the airflow-direction louvers have stopped
moving.
Vertical Air Direction Adjustment
Press the SET button (Vertical).
Each time the button is pressed, the air direction range will change as follows:
1
Types of Air fl ow Direction Setting:
:
During Cooling/Dry Modes
1, 2, 3, 4
: * During Heating mode
5, 6, 7
The Remote Controller's display does
not change.
● Use the air direction adjustments within the ranges shown above.
● The vertical airfl ow direction is set automatically as shown, in accordance with the
type of operation selected.
During Cooling/Dry mode
* During Heating mode
● During AUTO mode operation, for the fi rst minute after beginning operation, airfl ow
will be horizontal 1 ; the air direction cannot be adjusted during this period.
The airfl ow direction setting will temporarily become 1 when the temperature of the
airfl ow is low at the start of the Heating mode.
Horizontal Air Direction Adjustment
Press the SET button (Horizontal).
Each time the button is pressed, the air direction range will change as follows:
1
The Remote Controller's display does
not change.
● Use the air direction adjustments within the ranges shown above.
2
3
4
5
: Horizontal fl ow 1
: Downward fl ow 7
2
3
4
5
RIGHT/LEFT air direction louvers
Never place fi ngers or foreign objects inside
the outlet ports, since the internal fan ope-
rates at high speed and could cause personal
6
7
injury.
DANGER!
● Attempting to move UP/DOWN air
direction flaps or RIGHT/LEFT air di-
rection louvers manually could result
in improper operation; in this case,
stop operation and restart. The louvers
should begin to operate properly again.
● During use of the Cooling and Dry
modes, do not set the UP/DOWN air
direction fl aps in the Heating range (5
to 7 ) for long periods of time, since
water vapor may condense near the
outlet louvers and drops of water may
drip from the air conditioner. During
the Cooling and Dry modes, if the Air
Flow Direction Louvers are left in the
heating range for more than 30 mi-
nutes, they will automatically return to
position 4.
● When used in a room with infants, chil-
dren, elderly or sick persons, the air
direction and room temperature should
be considered carefully when making
settings.
En-10

Advertisement

Table of Contents
loading

  Related Manuals for Fujitsu Inverter 9374379446

This manual is also suitable for:

Floor/ceiling type