Download Print this page

Power-Sonic Power-Gel Series DCG12-65 Specifications

Power-gel series rechargeable sealed lead acid battery

Advertisement

Quick Links

12 Volt 65 AH
DCG12-65
Terminals
T6: Threaded insert w.
6 mm stud fastener
Physical Dimensions: in(mm)
L
RECHARGEABLE
GEL BATTERY
®
POWER-GEL SERIES
®
DCG 12-65
Pb
MH20845
NONSPILLABLE
Power-Sonic Corporation
12 Volt
65 Amp Hours
www.power-sonic.com
L: 10.25 (260) W: 6.60 (168) H: 8.15 (207) HT: 8.98 (228)
Tolerances are +/- 0.04 in. (+/- 1mm) and +/- 0.08 in. (+/- 2mm)
for height dimensions. All data subject to change without notice.
To ensure safe and effi cient operation always refer to the latest edition of our Technical Manual, as published on our website.
All data subject to change without notice.
(mm)
16mm
M6
6mm
W
HT
H
Features
Thixotropic gel electrolyte for enhanced performance
Valve regulated, spill proof construction allows safe
operation in any position
Superior capabilities
Power/volume ratio yielding unrivaled energy density
Rugged ABS plastic (UL94-HB) case and cover
Approved for transport by air. D.O.T., I.A.T.A., F.A.A. and
C.A.B. certifi ed
U.L. recognized - MH 20845
CE compliant
Performance Specifi cations
ominal Voltage ............................................................................ 12 volts (6 cells)
N
Nominal Capacity
20-hr.
(3.25A to 10.5 volts) ............................................................ 65.0 AH
10-hr.
(6.00A to 10.5 volts) ............................................................ 60.0 AH
5-hr.
(11.60A to 10.5 volts) .......................................................... 58.0 AH
3-hr.
(17.20A to 10.5 volts) ........................................................... 51.6 AH
1-hr.
(40.3A to 9.0 volts) .............................................................. 40.3 AH
Approximate Weight ................................................................ 48.0 lbs. (21.8 kg)
Energy Density (20-hr. rate) ..................................... 1.41 W-h/in3 (86.33 W-h/l)
Specifi c Energy (20-hr. rate) ................................ 16.25 W-h/lb (35.83 W-h/kg)
Internal Resistance (approx.) ......................................................... 4.5 milliohms
Shelf Life (% of nominal capacity at 68°F (20°C))
1 Month ..................................................................................................... 0.97
3 Months .................................................................................................... 0.91
6 Months ................................................................................................... 0.83
Operating Temperature Range
Charge .. ........................................................... -4°F (-20°C) to 122°F (50°C)
Discharge ....................................................... -40°F (-40°C) to 140°F (60°C)
Case .....................................................................................ABS Plastic (UL94 HB)
Recommended Power-Sonic Chargers ............................................................. n/a
www.power-sonic.com

Advertisement

loading
Need help?

Need help?

Do you have a question about the Power-Gel Series DCG12-65 and is the answer not in the manual?

Questions and answers

Summary of Contents for Power-Sonic Power-Gel Series DCG12-65

  • Page 1 Case ..................ABS Plastic (UL94 HB) L: 10.25 (260) W: 6.60 (168) H: 8.15 (207) HT: 8.98 (228) Recommended Power-Sonic Chargers ............. n/a Tolerances are +/- 0.04 in. (+/- 1mm) and +/- 0.08 in. (+/- 2mm) for height dimensions. All data subject to change without notice.
  • Page 2: Discharge Characteristics

    Chargers Power-Sonic offers a wide range of chargers suitable for batteries up to 100AH. Please refer to the Charger Selection Guide in our specification sheets for “C-Series Switch Mode Chargers” and “Transformer Type A and F Series”. Please contact our Technical department for advice if you have difficulty in locating suitable models.