Rear View; Digital Audio Output; Device Configuration Jumper - Pioneer DVR-A03-J Operating Instructions Manual

INTERFACE

REAR VIEW

Pin 1
Pin 1

9 Digital Audio Output

This is a connector for output of digital audio signal.
Pin Name
1 GND
2 Digital Out
0 Audio Output
This is a connector for output of analog audio.
This connector is compatible with `Molex 70553`, choose a suitable connection cable.
Pin Name
1 L
2 G
3 G
4 R

- Device Configuration Jumper

Switch becomes ON when short socket is put.
Make sure the power of the drive is off before changing jumper setting.
Pin # 1 is ON at the time of shipping from the plant.
Pin Name
1 MA
2 SL
3 CS
4
5
= Host IDE Interface
This is a 40 pin I/O connector according to the ATA specifications.
~ DC Input
Pin Name
1 +12
2 G
3 G
4 +5
En
Pin 1
9 0 -
Function
Ground.
Digital audio signal output.
Function
Left channel audio output.
Ground.
Ground.
Right channel audio output.
Function
on The drive is used in master mode.
on The drive is used in slave mode.
on Using Cable Select function.
Reserved.
Reserved.
Function
Power supply input for DC +12 V.
Ground.
Ground.
Power supply input for DC +5 V.
Pin 1
Pin 1
= ~