View Mode For 4:3 Programs; View Mode For Hd Programs; Labeling Channels - Sharp LC-19DV24U Operation Manual

Watching TV
View mode for 4:3 programs
Press VIEW MODE,
• The View mode menu displays.
• The menu lists the view mode options selectable for
the type of video signal currently being received.
Press 0-3 to select each view mode directly while
the View mode menu is still on the screen.
• Each time VIEW MODE is pressed, View Mode item
toggles.
• You can also select View Mode item by pressing ,L/_r.
• You can sequentially select a view mode that has its
own aspect ratio.
-m
Side Bar:
Suitable for viewing conventional
4:3 programs in their normal
format.
&Stretch (Smart stretch):
Suitable for stretching 4:3
programs to ill] the screen.
Zoom:
Suitable for viewing wide-screen
2.35:1 anamorphic DVDs in full
screen.
Stretch:
This mode is useful for 1.78:1 DVDs.
When viewing 1.85:1 DVDs,
stretch mode will still show very
thin black bands at the top and
bottom of the screen.
• You can enter to the same menu screenfrom "Picture"
menu.
• You cannot select "Side Bar" and "&Stretch" whBna720p
or 1080i signal is being input.
V!ew_i!mode foFHD pr0g'ra_is : i: i I
Stretch mode is available for HD programs.
Suitable for viewing wide-screen 1.78:1 aspect-ratio
programs. When viewing 1.85:1 programs, the stretch
mode will still show very thin black bands at the top
and bottom of the screen.
Labeling channels
To create channel labeIs
1 Select a channel you want to label.
2 Press TV MENU, then press _/T to select
"Channel", then press _ or ENTER.
Press ,_/_r to select "Ch Label", then press _ or
ENTER. The Ch Label menu will appear.
3 Press </1_ to select a channel you want to label,
then press T,
5
6
To
1
2
3
4
5
Press -</_ repeatedly until the character you want
appears in the first space.
The characters rotation as follows:
e ...9 ,e._A ..,z _ _ , ,0@ 1+=- <7
> SPACE <
If the character which you desire appears, press
ENTER. Repeat this step to enter the rest of the
characters.
When you finish inputting the label name, press
ENTER_
Press EXIT to return to the normal screen.
Repeat steps 1-5 for other channels. You can
assign a label to each channel,
erase channel labels
Select a channel with a label which you want to
remove.
Press "IV MENU, then press A/_' to select
"Channel", then press I_ or ENTER.
Press A/T to select"Ch Label", then press _- or
ENTER to display the Ch Label menu.
Press ,_/T to select "Label Clear". Press _.
Press EXIT to return to the normal screen.
Repeat steps 1-4 to erase other channel labels.
(_-17