Heat & Glo 6000CMOD-IPI Owner's Manual page 50

Only doors certifi ed for use with this appliance model
may be used. Contact your dealer for a list of doors that
may be used. Once you have determined what kind of
door and fi nishing material is going to be used on the
fi replace, you may use the table below which shows the
door models and the fi nishing material thickness allowed.
DOOR FIT
CMOD-8-BK Overlap
CMOD-8-GY Inside
CMOD-6-BK Overlap
CMOD-6-GY Inside
FOLIO Inside
50
FINISH MATERIAL SEE
THICKNESS FIGURE
1 inch thick or less 13.8
1-4 inches maximum 13.9
1 inch thick or less 13.8
1-4 inches maximum 13.9
Any 13.10
Heat & Glo • 6000CMOD-IPI, 8000CMOD-IPI • 2241-900 Rev. i • 4/13
Finishing Material:
1 Inch Thick or Less - Overlap Fit Method
DOOR
Finishing materials 1 inch maximum thick.
Stop fi nishing material fl ush with opening.
Figure 13.8 Finishing Material 1 Inch Thick or Less
1 in. MAX.
FINISHING MATERIAL
(TOP EDGE)
NON-COMBUSTIBLE
FINISHING MATERIAL