Replace Spark Plug - Snapper LT-200 Series Operator's Manual

RegularMaintenance
Replace Spark Plug
Service interval: Yearly
Spark Plug Gap: .030" (.76ram)
Replacement Spark Plug
Resistor Spark Plug, Champion RC12YC
1. Stop the engine and allow it to cool.
2. See Figures 31 or 32. Clean the area around the
spark plug.
3. Remove the spark plug.
4. Check the spark plug gap. It should be .030" (see
Figure 31 or 32).
5. Reinstall the plug into the cylinder head. Torque the
plug to 180 in. Ibs (20 N.m.).
-- .030"
Figure 32. Spark Plug Gapping
Figure 31. Spark Plug Gapping
27