GE Disposall GFC320 Series Owner's Manual And Installation Instructions page 6

Installation Instructions
Ik31DISHWASHER CONNECTION
If you are connecting to a dishwasher, complete the
following step. If a dishwasher is not to be connected,
go on to "Attaching the Discharge Elbow" section.
(IF REQUIRED)
%
KNOCK OUT PLUG
Using a blunt instrument (steel punch or wooden
dowel), knock out entire plug. Do not use a
screwdriver or sharp instrument. When knockout
plug falls into disposer, you may remove it or
simply grind it tap when the disposer is used. This
will not damage the disposer in any way, but may
take some time to grind, over the course of several
uses.
Knock out
plug
[] CONNECT HOSE
(;onnect the dishwasher hose using a hose clamp.
If the hose size is different, you will need a
stepped rubber adapter.
(}
Hose Clamp
Cb
Stepped R ubber Adapter
Ik']lATTACHING THE DISCHARGE ELBOW
CONNECT DISCHARGE ELBOW
Gonnect the discharge elbow to the disposer.* Make
sure all plumbing connections are tight.
Discharge
Elbow
Rubber
Gasket
* Some installations (see page 8 for examples) may
require the use of a flexible drain pipe.
6