Kanalile Nime Panemine - Philips 20/26/32HF5335D Installation Manual

Hospitality television
Hide thumbs Also See for 20/26/32HF5335D:
Table of Contents

Advertisement

Installing Analogue Programs
Ensure the TV is in Analogue mode. If it is in Digital mode, press the A/D (Analogue/Digital) key on the
Remote Control to enter the Analogue mode.
1.
Press the
2.
Press the Up/Down Arrow Key to scroll to the item called INSTALL and press OK
3.
Press the Up/Down Arrow Key to scroll to the item AUTO STORE and press OK
The TV will now start to scan and install all available (Analogue) TV channels automatically. This operation will
take a few minutes. The TV display will show the progress of the scan and the number of programmes found.
Refer to the chapter on
can also refer to the chapter on
preferred.
4.
Activating the Hotel Mode Setup menu (BDS)
1.
Switch on the television and select an analogue channel
2.
On the Remote Control, press keys: [3, 1, 9, 7, 5, 3, MUTE]
3.
The BDS HOTEL MODE SETUP MENU becomes visible
4.
Use the cursor keys to select and change any of the following settings:
Function
BDS MODE
SWITCH ON SETTINGS
SWITCH ON VOLUME
MAXIMUM VOLUME
SWITCH ON CHANNEL
POWER ON
DISPLAY MESSAGE
WELCOME MESSAGE
CONTROL SETTINGS
LOCAL KEYBOARD LOCK
REMOTE CONTROL LOCK
OSD DISPLAY
HIGH SECURITY MODE
AUTO SCART
MONITOR OUT
BLANK CHANNEL
STORE
5.
Select "STORE" and press [CURSOR RIGHT] to save the settings and exit BDS Hotel Mode
setup. Press [MENU] to exit without saving.
6.
For BDS Hotel Mode settings to take effect, you must turn the TV set Off, then back On.
BDS Hotel Mode Functions
This paragraph describes the functionality of each item in the BDS Hotel Mode Setup menu.
BDS MODE
ON
BDS Hotel Mode is ON:
The user menu is blocked.
All settings of the Hotel Mode Setup menu are in effect.
(Menu TV) key on the Remote Control
Automatic Tuning of Analogue Programmes
Manual Tuning of Analogue Programmes
in the User Manual for more details. You
in the User Manual if a manual scan is
Possible selections
ON /OFF
0-100, LAST STATUS
0-100
USER DEFINED, LAST STATUS
ON/STANDBY/LAST STATUS
ON/OFF
LINE 1/LINE 2/CLEAR
ON/OFF/ALL
ON/OFF
ON/OFF
ON/OFF
ON/OFF
ON/OFF
ON/OFF
>
- 3 -

Advertisement

Table of Contents
loading

Table of Contents