Troubleshooting - Philips KALA TD6830 Manual

KALA Combine multilingue
How to register the handset with another base station
This option is only used to connect your handset to another base station for increased range (you
should reset the base station before entering the RC code).
Function number
1/1
Earpiece programming option
Function number
1/1
Should you use a KALA 200 base station as your main telephone installation, please visit
www.pcc.philips.com for details concerning the telephone answering machine options and other settings.
For all other equipment, consult your base station user guide.
Problem
• No dialling tone when pressing
the talk key.
• Area icon not displayed or blink-
ing.
• When the handset is placed on
the charging unit, no beep is
heard.
• Battery icon remains empty
although the handset has charged
for 24 hours.
• No symbol on the display.
• Bad audio quality (cracks, mute,
echo, vibration, etc.).
Philips has designed this product to work on PSTN line and cannot guarantee the complete application on ISDN network.
6
The KALA TD6830 is compliant with operator's analogue interface.
23/02/01 18:30
PROGRAMMING OPTIONS (CONT'D)
Programmable function
Registers the handset
Programmable function
Modifies earpiece volume

TROUBLESHOOTING

Error
Cause or causes
Beep
The base station is not properly connected
Yes
to electricity or to the telephone sockets.
Batteries are low.
Yes
The handset is out of range.
The handset is not placed correctly on the
-
base station charging unit.
Charging contacts are dirty.
-
Handset batteries are defective.
-
Batteries are low.
-
Base station plugged too near from other
-
electrical appliance.
Base station installed in a room with thick
-
walls.
You are using the handset too far from the
-
base station.
Page 6
Select
Type value 0000 to 9999
Select
List: 1 to 4
Solution
Check the connections.
Charge batteries.
Register the handset to the base station.
Take the handset off the charger and put it back
again.
Clean them with a clean and dry cloth.
Please contact your PHILIPS dealer in order to
purchase new rechargeable batteries (see
Inserting/Replacing batteries Page 2).
Charge batteries.
Try to plug the base station in another place.
Try to plug the base station in another place.
Move closer to the base station.