Alarm; Set The Alarm; Turn Off The Alarm; Services - Philips MT3120 User Manual

Alarm

Your phone has a built-in alarm clock.

Set the alarm

1
Tap to access the main menu screen.
2
> [Alarm], then tap
Select
3
Select [On/off] > [On], then tap
confirm.
4
Select [Alarm time], then tap
confirm.
5
Tap / once or several times to enter
an alarm time, then tap
6
Select [Repetition], then tap
7
Select an alarm occurrence, then tap
confirm.
8
Select [Alarm tone], then tap
9
Select a tone from options, then tap
confirm.
» The alarm is set and
the screen.
Tip
•
Tap / to switch between [AM]/[PM] .
Note
•
The alarm clock rings at the preset time every day until
it is set to [Off].

Turn off the alarm

When the alarm rings
Press any key to turn off the alarm.
Before the alarm rings
1
Tap to access the main menu screen.
2
Select > [Alarm] > tap
3
Select [On/off] > [Off], then tap
confirm.
to confirm.
to
to
to confirm.
to confirm.
to
.
to
is displayed on
to confirm.
to
» The setting is saved.

Services

Call list type

You can set if you can see all calls or missed
calls from the call log.
Set the call list type
1
Tap to access the main menu screen.
2
> [Services] > [Call list type],
Select
then tap to confirm.
3
Select an option, then tap

ECO mode

The handsfree phone supports Eco mode to
minimize transmission power and radiation.
1
Tap to access the main menu screen.
2
>[Services]> [Eco mode], then
Select
tap to confirm.
You can choose between two modes:
[Off]: No reduction of transmission power.
•
[On]:
•
• In Eco mode, transmission will be
reduced to minimize radiation. For
selected Philips models (CD48x,
CD49x, CD68x, CD69x and SE888),
both the handset and DECT base will
reduce transmission power drastically
when the handset is close to the base.
The transmission power increases
automatically only when the handset
is further away from the base. Make
sure that Eco mode is also enabled
for these models when selecting Eco
mode on your handsfree phone. In this
mode, the range will be reduced by
approximately 50%.
• If you register your handsfree phone
with another phone base not listed
above, the handsfree phone will reduce
transmission power automatically when
it is close to the base. The DECT base
to confirm.
EN
19