Control Panel Buttons; Control Panel Display - GE Appliances Profile GXCF35GBS Owner's Manual

Usingthe water dispenser.
PM
Control Panel Buttons
0 Power ON/OFFButton @. Turns tile cooling and heating
operation ON or OFF. The button must be on to see
tile entire display. Never start tile trait without a bottle
containing water installed,
0 SETButton @. Advances the control panel display
through the teattlI'es that are a(!justable. _]/ell in the
SET mode, "SET" is displayed on the display panel. The
control panel will automatically return to the operating
mode if no other
button is pushed within 1 minute,
accepting any new a(!jusm/ents.
Feature Adjustment and Control Panel Lock Buttons.Tile
buttons are used individually to a(!just tile ti_atm'e \_dues
when the control is in the SET mode. The buttons can be
pressed and held tot ti_st scrolling. A Control Panel I,ock
can be engaged and disengaged by pressing both tile
and _ buttons
at tile same time. When tile control
panel is locked, no changes can be made to tile control;
howe\'e_; water dispensing is not affected.
and _ timer Controls. Tile TIMER/STARTbumm (4)
initiates tile (fisplay of file countdown timer
and
starts file fiIneI: Tile STOP/CANCEL button (5) stops
file timer flmcfion and cancels file timer (fisplay,
Tile hom'glass timer icon }_ is displayed while file
timer feature is selected and active.
Energy Saver ON/OFFButton @. Note:The
clock must be
set for tile Energy' Saver ti_atm'e to operate properly. This
btltton ttlrns Oil and
off
tile programmed Energy Saver
cycle that controls the heater operation to save energ)'
(lining low usage periods of tile day and week. Tile
delimit setting is set at tile ti_ctm T tot optimal energy'
pe_ti)mmnce--hot water operation is set to start at 6:00
am and stop at 8:00 pro. Tm'ning
tile teature off returns
tile dispenser to n(mnal operation and alhm:s tile
dispenser to continuously produce hot and cold water
24 horns a (la5 7 days a week.
Faucet Light ON/OFFButton @. Turns tile fimcet light on
oI" ()_
Control Panel Display
Temperature Setting Display. The hot and cold water
temperature settings can be selected to display in either
degrees Fahrenheit
(:,r Celsius.
Clock and timerOisplay. Tile clock and clay (ff tile week
are displayed nom_ally. When tile timer flmction has
been selected, tile clock display is converted to a
co/intdown [Jill eI'.
timerlcon _. Tile timer icon is lit when
tile timer
fimction has been selected. The icon displays motion
when the timer comKdown is active,
Energy Saver--Dispenser Operation Start time Icon @.
Tile light blue start time icon will be lit in tile SET mode,
indicating the programmed time when the dispenser
is to begin fifll hot water operation.
Energy Saver--Dispenser Operation Stop time Icon @. Tile
red stop time icon will be lit in tile SET mode, indicating
tile programmed time when tile dispenser hot water
operation will be shut off'.
Energy Saver/con _. Tile energai saver icon will be solidly
lit when the programmed operation cycle has been
activated. In this mode, the icon will display motion
of tile arrows indicating hot water operation has been
shut off to save energy:
ControlPanel Lock Icon _ . Tile control
panel lock icon
will be lit when the lock feature has been engaged.
Hot Water Operation Icon _ . The cup will be
displayed
when the hot water system is acti\:_ted. The steam
elements will move while the heater is operating and all
three elements will remain lit when tile set temperatm'e
has been attained.
@
Cooling System Operation Icon _ . Tile snowflake will be
displayed when the cooling system is actiw_ted. The
snowflake elements will be in motion when the cooling
system is operating and all 6 elements will remain lit
when the set temperature is attained. (The snowflake and
the 40F (4C) icons will not be lit during periods of the
Energy' Saver cycle even though tile cooling system is
framing to maintain tile compartment temperature.)