Cycle Options - GE Appliances GFD5140 Owner's Manual

About cycle options.
NOTE: Not all features are available on all dryer models. GEAppliances.com
ExtTumble
)
Extended Tumble
Minimizeswrinkles by adding approximately
60 minutes of no-heat tumbling after clothes
are dry. The beeper will sound every two
minutes as a reminder to remove the clothes.
TheESTIMATED TIMEREMAININGdisplay will
show 0:00.
The extended tumble time does not get added
to the cycle time on the display
DelayDry
Delag Dry (on some models)
Useto delay the start ofyour dryer.
1. Choose your dry cycle and any options.
2. PressDelay Dry. You can increase
the delay time in i hour increments using
the Delay Dry button.
3. Pressthe Start pad to start
the countdown.
NOTES:
• If the door is opened while the dryer is
in Delay Dry, the countdown time will not
restart unless the door is closed and Start
has been pressed again.
(
m
]
e-DRY
Reducesthe total energy consumption of
specific dryer cycles by adjusting certain heat
settings.
Note: Cycle times will change when e-DRYis
selected.
This feature can be used with Delicate& Easy
Care, Normal MixedLoads and Cottons.
Signal
Signal
Alerts you that the cycle is complete.
The beeper will continue to sound every
minute for the next 5 minutes, until the
clothes have been removed. The clothes
should be removed when the beeper goes
off so wrinkles don't set in.
PressSignal to select low, medium or high
volume, or to turn the beeper off.