Clock And Timer - GE Appliances JGB500 Owner's Manual And Installation Instructions

Self cleaning ranges
Table of Contents

Advertisement

Using the clockand timer.
GEAppliances.com
Not all features are on all models.
iiii IiilI
l
ii
Make surethe clock is set to the correct
time of day,
To Set the Clock
The clock must be set to the correct time of
dag for the automatic oven timing functions
to work properlg. The time of dag cannot be
changed during a timed baking or self-
cleaning cgcle.
[_
Touch the Clock pad.
[_
Touch the number pads.
Touch the number pads the same wag gou
read them. Forexample, to set 12:54,touch
the number pads l, 2, 3 and 4 in that order.
If number pads are not touched within one
minute after gou touch the Clock pad, the
displag reverts to the original setting. If this
happens, touch the Clock pad and reenter
the time of dag.
[_
Touch the Start pad until the time of
dag shows in the displag.This enters
the time and starts the clock.
To check the time of dag when the displag
is showing other information, simplg touch
the Clock pad. The time of dag shows until
another pad is touched.
KITCHEN ]
TIMER
j
ON/ OFF
The timer is a minute timer only.
The Clear/Offpad does not affect the
timer.
To Set the Timer
The timer does not control oven operations.
The maximum setting on the timer is 9 hours
and 59 minutes.
Touch the Kitchen Timer On/Off pad.
Touch the number pads until the
amount of time you want shows in the
display. The maximum time that can be
entered in minutes is 59.Times more
than 59 minutes should be changed to
hours and minutes. For example, to
enter 90 minutes as 1 hour 30 minutes,
touch 1,3 and 0 in that order.
Ifgou make a mistake, press the Kitchen
Timer On/Off pad and begin again.
%
Touch the Start pad. After pressing the
Start pad, Set disappears; this tells gou
the time is counting down, although the
displag does not change until one
minute has passed.
[]
When the timer reaches :00othe control
will beep 3 times followed bg one beep
everg 6 seconds until the Kitchen Timer
On/Off pad is touched.
The 6-second tone can be canceled bg
following the steps in the Special features
of gout oven control section under Tones
at the End of a Timed Cgde.
To Reset the Timer
If the displog is still showing the time
remaining, gou mag change it bg touching
the Kitchen Timer On/Off pad and then
touching the number pads until the time
gou want appears in the displag.
If the remaining time is not in the displag
(clock,delag start or cooking time are in the
displag), recall the remaining time bg
touching the Kitchen Timer On/Off pad and
then touching the number pads to enter the
new time gou want.
To Cancel the Timer
Touch the Kitchen Timer On/Off pad twice.
Power Outage
If a flashing time is in the displag, gou have
experienceda power failure. Resetthe clock.
Touch the Clock pad once to reset. Enter
the correct time of dag bg touching the
appropriate number pads.Touch the Start
pad.
t_
O"
o_
illiiiii'_'iiiiiiiiiiiiii
¢
v
o_
O
O
o_
on
o_
to
0
0
15
i

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Jgb605Pgb916Pgb918Pgb975Pgb900Pgb908 ... Show all

Table of Contents