Table of Contents
Advertisement
IMPORTANT SAFETY INFORMATION.
READALLINSTRUCTIONS BEFORE USING.
WARNING!
For your safety, the information in this manual must be followed to minimize the risk of fire, electric shock
or personal injury.
SAFETY P RECAUTIONS
"_:
_
N Use this appliance
only for its intended
purpose
as described
in this Owner's
Manual.
This air conditioner
must be properly
installed
in accordance
with tile Installation
Instructions
before it is used.
N Tm'n the mode conU'ol OFFand unplug
your air conditioner
before making
any
repai1* or cleaning.
NOTE:We strongly recommend
that any
servicing be pelfonned
by a qualified
individual.
N Never unplug
your air conditioner
by pulling
on the power cord. Always grip plug firmly
and pull straight
out from the receptacle.
N Repair or replace immediamly all elecUic
service cords that have become fi'ayed or
othelwise damaged. Do not use a cord that
shows cracks or abiasion damage along its
length or at either the plug or connector end.
N For your safety...do
not store or use
combustible
mamrials,
gasoline
or other
flammable
vapors or liquids in the vidnity
of this or any other appliance.
HOWTOCONNECT ELECTRICITY
Do not, under any circumstances, cut or remove
the third (ground) prong from the power cord. For
personal safety, this appliance must be properly
grounded.
The power cord of this appliance
is equipped
with a 3-prong
(,grounding)
plugwhich
mates
with a standard
3-prong
(grounding)
wall
outlet
m minimize
the possibility
of electric
shock hazard fi'om this appliance.
Have the wall outlet
and drcuit
checked
by a
qualified
elecu'ician
m make sure the oudet is
properly
,grounded.
Where
a 2-prong wall outlet is encounmred,
it is yore" personal
responsibility
and obligation
m have it replaced
with a properly
gq'ounded
?_-prong wall outlet.
The air conditioner
should
always be
plugged
into its own individual
elecuJcal
outlet which has a voltage rating that matches
the rating plate.
This provides
the best peffommnce
and also
prevents
overloading
house wiling circuits
which could cause a fire hazard
fi'om
overheated
*vires.
See the Installation
Instructions,
Electrical
Requirements section
for specific elecUical
connection
requirements.
2
Advertisement
Table of Contents
