Installations; Dishwasher Connection - GE Appliances Disposall GFC320 Owner's Manual And Installation Instructions

Installation Instructions
I_ DISHWASHER CONNECTION (IF REQUIRED)
If you are connecting to a dishwasher, complete the
following step. If a dishwasher is not to be connected,
go on to "Attaching the Discharge Elbow" section.
%
KNOCK OUT PLUG
Using a blunt instrument (steel punch or wooden
dowel), knock out entire plug. Do not use a
screwdrNer or sharp instrument. When knockout
plug falls into disposer, you may remove it or
simply grind it up when the disposer is used. This
will not damage the disposer in any way, but may
take some time to grind, over the course of several
uses.
Knockout
plug
I_ CONNECT HOSE
(;onnect the dishwasher hose using a hose clamp.
If the hose size is different, you will need a
stepped rubber adapter.
Hose Clamp Stepped Rubber Adapter
I_ ATTACHING THE DISCHARGE ELBOW
CONNECT DISCHARGE ELBOW
Gonnect the discharge elbow to the disposer.* Make
sure all plumbing connections are tight.
Discharge
Elbow
Rubber
Gasket
rh.
* Some installations (see page 8 for examples) may
require the use of a flexible drain pipe.
6