Windows 95 Installation - M-Audio Delta 1010 Manual

2. The 'Add New Hardware Wizard' will now ask how you want to find the
driver. "Search for the best driver for your device" is already selected. Click
'Next>'.
3. Windows will give you a selection of locations to search. Make sure that only
"Choose a Path" is checked, or click on the check box to do so. Insert the
Driver CD into your CD ROM drive. Browse to your CD ROM open the Delta
Series folder select the corresponding opperating system (win9x). Click
'Next>'.
4. The 'Wizard' reports that its Windows driver file search has found the M
Audio Delta 1010. Click Next>.
5. Windows is now ready to install the driver files from the specified location.
Click Next>. Windows will start to copy the files and show you a progress
report screen.
6. The Wizard reports that Windows has finished installing the software. Click
'Finish'. Your Delta 1010 is ready for action.
After completion of the driver installation, Windows may require you to restart
Windows. If it does request a restart, remove the Drivers CD Disk from the CD
drive and respond "Yes". The system will restart and your Delta 1010 is ready
for play.

Windows 95 Installation

1. After installation of the Delta 1010 hardware, boot your system and start
Windows. During the Windows boot procedure, new hardware will be
automatically detected.
2. Choose the Install of "driver from disk provided by hardware manufacturer,"
then click OK.
3. An 'Install From Disk' will prompt you to copy files from the A:\ drive. Insert
the Driver software CD into your CD ROM drive. Browse to your CD ROM
open the Delta Series folder select the corresponding opperating system
7