Shure PS21 User Manual

System Components
english
PG4 Wireless
Receiver
C
for worry-free performance.
ongratulations on
Performance Gear Wireless
purchasing your Shure
systems are available in a
Performance Gear Wireless
variety of configurations for
system. Shure professional
handheld, guitar, headset, and
audio products deliver legendary
presentation applications.
sound quality, stage-proven
durability and hassle-free setup
Headworn Mic
©2008 Shure Incorporated
Printed in U.S.A.
27EN8865 (Rev. 5)
Startup
Follow these simple steps to check for interference and to
set your receiver and transmitter to the same channel
PS21
Power Supply
1 Turn OFF the microphone
or bodypack.
If left on, it will create a
false busy indicator.
PG88 Dual Wireless Receiver
2
Plug in the power supply.
The channel display should
illuminate.
There is no power switch.
PG1
Bodypack
3
Press and hold down the
Transmitter
channel button until the
display begins flashing.
PG2 Handheld
Transmitter
If you see the Busy
PG185
Indicator (a flashing dash)
Lavalier Mic
change the channel.
4
Wait for the channel display
to stop flashing.
PG30 audi o
5
If you haven't installed the
battery, do it now and leave the
cover off.
.
6 Turn ON the handheld or
bodypack transmitter by pressing
the power button.
The channel display should
illuminate.
It turns off after ten seconds to
conserve battery.
7 Check to see that the transmitter
and the receiver display the
same channel.
Internal Anten
audio ready
audio ready
channel
The ready LED on the receiver
Inter nal Dive r should be illuminated.
read y
cha nne l
8
Replace battery cover.
Features
Busy Indicator
When selecting channels,
a flashing dash indicates
interference from television
broadcasts, electronic devices
or other wireless systems.
If this occurs, change the
channel.
Changing Channels
Press and hold the channel
Interna l Anten
button until the display starts
flashing.
audio
ready
While the display is flashing,
chann el
press the channel button.
The channel is active once the
display stops flashing. Receiver
and transmitter channels should
Internal Antenna Diversity match.
channel
audio ready channel
Testing Audio
Talk or sing into the
Internal Diversity Antenna Syste
microphone or play
instrument.
audio ready channel
The audio LED on the
aud io
receiver should flicker green
rea dy
or amber, if red, adjust the
Gain Switch.
Locking and Unlocking Transmitter Controls
Lock system controls to prevent accidental muting.
To lock controls: Turn transmitter off. Remove Battery Cover.
Press and hold Channel Button. Press and release Power/Mute button.
Power/Mute LED will flash red and green.
To unlock controls: Press and hold Power/Mute button down until
Power/Mute LED flashes red and green.
Accessing Gain Switch
Multiple gain settings are available on the PG1 and PG2 transmitters.
To change gain settings, see below.
0dB For instrument or quiet to normal vocal performance (default).
–10dB Use if audio is distorted due to high vocal or instrument levels.
mic Use for headworn or lavalier microphones (PG1 only).
LED Status
TRANSMITTER
LED COLOR STATUS
Green Ready
Internal Antenna Diversity
Amber Mute on
Red Battery low*
Flashing Red on startup Battery is dead
Flashing Green and Red Controls locked
Flashing Amber and Red Mute on, battery low
RECEIVER
AUDIO LED COLOR INDICATES
Green Normal signal strength
Amber Inte rna l Div er Strong signal
Red Peak signal
READY DISPLAY COLOR INDICATES
Green System is ready
* See "Changing Battery" cha nne l