Appendix B - Technical Specs; Analog Audio; A/D And D/A Converters; Interface Resource Requirements - M-Audio Dman 2044 Manual

Appendix B - Technical Specs

Analog Audio

Full-scale Input Signal:
Full-scale Output Signal:
Input Impedance:
Frequency Response:
Channel Separation:
Input Connectors:
Output Connectors:

A/D and D/A Converters

Type:
Sample Rates:
Dynamic Range:
A/D Signal/Noise Ratio:
D/A Signal/Noise Ratio:

Interface Resource Requirements

IRQ:
I/O Addresses:
DMA Channels:
+14.9 dBu (+4 dB operation),
+1.0 dBv (-10 dB operation).
2 Volts RMS.
10k ohms minimum.
20 Hz - 22 kHz (± 0.5 dB).
92 dB.
1/4" female TS-type, unbalanced analog.
1/4" female TS-type, unbalanced analog.
20-bit, delta-sigma, 128x oversampling
48 kHz, 44.1 kHz, 24 kHz, 22.05 kHz
99 dB (A-weighted)
93.3 dB (A-weighted), 16-bit mode
94 dB (A-weighted), 16-bit mode
One required.
One block of 256 addresses required.
None required.
35