Service Journal; Pre-Delivery Service; After The First 8 Hours - Husqvarna Rider 115B Operator's Manual

Pre-delivery service

1 Charge the battery for 4 hours at max. 3 amp.
2 Attach the cutting unit to the machine, see Attaching the cutting unit.
3 Fit steering wheel, seat and any optional equipment.
4 Check and adjust tyre pressure. (60 kPa, 0.6 bar, 9 psi).
5 Check that the right amount of oil is in the engine.
6 Connect battery.
7 Fill with fuel and start engine.
8 Check that machine does not move in neutral.
9 Check:
Forward drive.
Reverse drive.
Operation of blades.
Seat safety switch.
Lif lever safety switch.
Safety switch for parking brake.
Check engine speed. See the Technical data section.
10 Tell customer about:
Needs and benefits of following the service schedule.
Servicing and the influence of this journal on the second-hand value of the machine.
Range of applications for BioClip.
Complete proof of sale etc.
Pre-delivery service carried out. No outstanding problems. Certified:
____________________________________________________________________________________________
Date, mileage, stamp, signature
After the first 8 hours
1 Change engine oil
4 –
English

Service journal