RIDGID NaviTrack 10 Operator's Manual page 5

NaviTrack
NaviTrack Line Transmitter Use and Care
•
Use equipment only as directed. Do not
operate the NaviTrack Transmitter unless
proper training has been completed and the
owners manual read
•
Do not immerse the leads or case in water.
Store in a dry place. Such measures reduce
the risk of electric shock and equipment
damage.
•
Store idle tools out of the reach of children
and other untrained persons. Tools are
dangerous in the hands of untrained users.
•
Maintain tools with care. Properly maintained
tools are less likely to cause injury.
•
Check for breakage of parts, and any other
conditions that may affect the NaviTrack's
operation. If damaged, have the tool serviced
before using. Many accidents are caused by
poorly maintained tools.
•
Use only accessories that are recommended
by the manufacturer
Accessories that may be suitable for one tool
may become hazardous when used on another
tool.
•
Keep handles dry and clean; free from oil
and grease. Allows for better control of the tool.
•
Protect against excessive heat. The product
should be situated away from heat sources
such as radiators, heat registers, stoves or
other products
produce heat.
Service
•
Tool service must be performed only by
qualified repair
maintenance performed by unqualified repair
personnel could result in injury.
•
When servicing a tool, use only identical
replacement parts. Follow instructions in the
Maintenance Section of this manual. Use of
unauthorized parts
maintenance instructions may create a risk of
electrical shock or injury.
•
Follow instructions
accessories. Accidents are caused by poorly
maintained tools.
•
Provide proper cleaning. Remove battery
before cleaning. Do not use liquid cleaners or
aerosol cleaners. Use a damp cloth for
cleaning.
Ridge Tool Company
®
Line Transmitter
for your
(including amplifiers)
personnel. Service
or failure to follow
for changing
Elyria, Ohio
•
Conduct a safety check. Upon completion of
any service or repair of this product, ask the
service technician to perform safety checks to
determine that the product is in proper
operating condition.
•
Damage to the product that requires service.
Remove the batteries and refer servicing to
qualified service personnel under any of the
following conditions:
o
o
o
o
Remove batteries entirely before shipping.
tool.
If you have any questions regarding the service or
repair of this machine, call or write to:
Ridge Tool Company
Technical Service Department
400 Clark Street
Elyria, Ohio 44035-6001
Tel: (800) 519-3456
E-mail:
www.ridgid.com
that
In any correspondence,
information shown on the nameplate of your tool
including model number and serial number.
or
NaviTrack and SeekTech locators are diagnostic
tools that sense electromagnetic fields emitted by
objects underground. They are meant to aid the
user in locating these objects by recognizing
characteristics of their field lines and displaying
them on the screen. As electromagnetic field lines
can be distorted and interfered with it is important
to verify the location of
before digging.
Exposing the utility is the only way to verify its
existence, location and depth. Ridge Tool Co.,
its affiliates and suppliers, will not be liable for
any injury or any direct, indirect, incidental or
consequential damages sustained or incurred
by reason of the use of the NaviTrack.
U.S.A
www.navitrack.com
If liquid has been spilled or objects have
fallen into product;
If product does not operate normally by
following the operating instructions;
If the product has been dropped or
damaged in any way;
When the product exhibits a distinct
change in performance.
CAUTION
TechServices@ridgid.com
please
WARNING
underground objects
give all the
3