Registering Scan Destinations - Ricoh SP C240SF Initial Manual

Initial guide for scanner and fax functions
Hide thumbs Also See for SP C240SF:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 3

Registering Scan Destinations

This section describes how to register scan destinations in the Address Book. To send scanned files to an
e-mail address (Scan to E-mail), FTP server (Scan to FTP), or a shared folder on a network computer
(Scan to Folder), you must first register the destination in the Address Book using Web Image Monitor.
• Depending on your network environment, the Scan to FTP and Scan to Folder functions may
require a user name and password to be correctly entered in the destination information. In such
cases, after registering destinations, check that the user name and password are correctly entered
by sending test documents to those destinations.
The Address Book can contain up to 100 entries, including 20 Quick Dial entries.
Destinations registered as Quick Dial entries can be selected by pressing the corresponding One Touch
button.
1.
Start the Web browser, and access the machine by entering its IP address.
2.
Click [Quick Dial Destination] or [Scan Destination].
3.
From the [Destination Type] list, select [E-mail Address], [FTP] or [Folder].
4.
Register information as necessary.
The information you must register varies depending on the destination type. For details, see the
tables below.
5.
Enter the administrator password if required.
6.
Click [Apply].
7.
Close the Web browser.
Scan to E-mail Settings
Registering Scan Destinations
1
11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sp c242sf

Table of Contents