Routing & Guidance; Rerouting - Honda Ridgeline Navigation Manual

System Setup
4. Say or select Done to perform the
deletion, and the display returns to
the previous screen.
Tip:
You can delete all addresses by
selecting Delete All.
86
Navigation System
Routing & Guidance (first)
From the Setup screen (second), say or
select Routing & Guidance and the
following screen appears:

Rerouting

If Rerouting is set to Automatic and
you deviate from the route, you will see
"Recalculating ..." at the top of the
screen for several seconds as the system
calculates a new route. This is followed
by new routing instructions.
If Rerouting is set to Manual, you
will hear a tone when the "Off route"
message is displayed. Say "Recalculate"
or touch the Recalc. button on the
screen to make the system recalculate
your new route.
NOTE:
• If you live in an area with poor
mapping, you may wish to set
Rerouting to Manual to avoid
constant recalculation. However, you
will have to manually touch Recalc.
on the screen to have the system plot
a new route.
• It is strongly recommended that you
leave the system set to the factory
default (Automatic).