Temperature Set Back Timer - Fujitsu Inverter ARTG09LL Operating Manual

TEMPERATURE SET BACK TIMER

Temperature SET BACK timer setting
1
SET BACK
Press the SET BACK button to change to the SET BACK con-
fi rmation display.
The SET BACK operating time and the set temperature will be
displayed.
3
● Day setting
1
Follow the same procedures to set the operating time as those for the weekly timer. The TIMER DELETE button is also used
as described in the procedures for the weekly timer.
4
● Temperature setting
SET BACK temperature
Normal temperature
Temperature SET BACK timer operation
● To start
SET BACK
Press the SET BACK button. The SET BACK confi rmation display appears for
5 seconds, and then the timer starts automatically.
NOTES
• The SET BACK timer only changes the set temperature, it cannot be used to start or stop air conditioner operation.
• The SET BACK timer can be set to operate up to 2 times per day but only 1 temperature setting can be used.
• The SET BACK timer can be used together with the ON, OFF, and weekly timer functions.
• The SET BACK operating time is displayed only in the SET BACK confi rmation display. (Refer to step 1 for the SET BACK
confi rmation display.)
● Operating time setting
2
3
Press the SET TEMP. buttons to set the
temperature. (The temperature setting range
is the same as the range for the operation
mode.)
ex. Operating time 15:00–22:00
ON
28°C
24°C
ex. Display during SET BACK timer operation
(The operating time will not be displayed.)
If there is no existing
SET BACK tempera-
ture setting, "- -" will
be displayed for the
temperature.
4
OFF
24°C
2
Press the TIMER SET button
for 2 seconds or more.
ex. When setting all days together
5
3
Repeat steps and
Press the TIMER SET button for
2 seconds or more to complete
the temperature SET BACK timer
settings.
● To cancel
1
Press the SET BACK button, and then
press the TIMER DELETE button while
the SET BACK confi rmation display is
displayed. Even if the SET BACK button
is pressed again, the SET BACK timer
will be cancelled.
4
.
2
En-10