Control Lock - Whirlpool WERP3100PQ4 Use & Care Manual

Table of Contents

Advertisement

Available languages

Available languages

The Timer can be set in hours or minutes up to 12 hours and
0 minutes, and counts down the set time. The Timer does not
start or stop the oven.
To Set:
1. Press TIMER SET/OFF. The timer indicator light will light up
on some models. If no action is taken after 1 minute, the
display will return to the time of day.
2. Depending on your model, press the HR or MIN or TIME/
TEMP "up" or "down" arrow pads to set the length of time.
3. Press TIMER SET/OFF. When the set time ends, end-of-cycle
tones will sound, then, if enabled, reminder tones will sound
every minute on some models.
4. Press TIMER SET/OFF anytime to cancel the Timer and
reminder tones.
Remember, do not press the Off/Cancel pad because the
oven will turn off.
On some models, to display the time of day for 5 seconds when
the timer is counting down, press CLOCK.
_,, . ....... _,,_ ,(8£
The Control Lock shuts down the control panel pads to avoid
unintended
use of the oven.
When the control is locked, only the CLOCK SET, OVEN LIGHT
(on some models) and TIMER pads will function.
To Lock/Unlock
Control:
Before locking, make sure the oven is
off. Press and hold "Lock" key for 5 seconds. A single tone will
sound, and "Loc" will appear on the display.
Repeat to unlock. "Loc" will disappear from the display.
The oven control is set to automatically shut the oven off
12 hours after the oven turns on. This will not interfere with any
timed or delayed cook function.
To Set: On some models, press and hold DELAY for 5 seconds.
"12 HR SHUT-OFF ON" will appear on the display. Press and hold
DELAY again for 5 seconds to turn off.
IMPORTANT: Do not use a thermometer
to measure oven
temperature because opening the oven door may cause burner
cycling to give incorrect readings.
The oven provides accurate temperatures;
however, it may cook
faster or slower than your previous oven, so the temperature
calibration can be adjusted. It can be changed in Fahrenheit or
Celsius.
A minus sign means the oven will be cooler by the displayed
amount. The absence of a sign means the oven will be warmer by
the displayed amount. Use the following chart as a guide.
ADJUSTMENT
°F
COOKS FOOD
(ADJUSTMENT
°C)
10°F (5°0)
...a little more
20°F (10°C)
...moderately more
30°F (15°C)
...much more
-10°F (-5°C)
...a little less
-20°F (-10°C)
...moderately less
-30°F (-15°C)
...much less
To Adjust
Oven Temperature
Calibration:
Style 1 - Electronic Oven Control
1. Press and hold OVEN LIGHT for 5 seconds until the oven
display shows the current calibration, for example,
"0°F '' will
appear on the display.
2. Press the TEMP "up" or "down" arrow pad(s) to increase or to
decrease the temperature
in 10°F (5°C) amounts. The
adjustment
can be set between 30°F (15°C) and
-30°F (-15°C).
3. Press START.
Styles 2 & 3 - Electronic
Oven Controls
1. Press and hold BAKE for 5 seconds until the oven display
shows the current calibration, for example "0°F CAL" or "00."
2. Press the TEMP or TEMP/-i-IME "up" or "down" arrow pad(s)
to increase or to decrease the temperature
in 10°F (5°C)
amounts. The adjustment can be set between 30°F (15°C)
and -30°F (-15°C).
3. Press START.
12

Advertisement

Table of Contents
loading

This manual is also suitable for:

Werp3100pb4Werp3100ps4

Table of Contents