Cool Only Models - Whirlpool ACE184PT1 Use & Care Manual

ToSettheTimer Delay
TosetTimer to turnofftheairconditioner ( airconditioner
mustbeon):
1.
Press TIMER.Timer indicator light on the air conditioner
control panel will flash.
2=
3.
Press the plus or minus button to change the delay time from
1 to 24 hours.
Press TIMER again or wait 10 seconds. Timer indicator light
on the air conditioner control panel will remain on.
To set Timer to turn on the air conditioner, keeping
previous settings:
1. Turn off the air conditioner.
2. Press TIMER. Timer indicator light on the air conditioner
control panel will flash.
3=
4.
Press the plus or minus button to change delay time from 1 to
24 hours.
Press TIMER again or wait 10 seconds. Timer indicator light
on the air conditioner control panel will remain on.
To set Timer to turn on the air conditioner, changing the
previous settings:
1. Turn on the air conditioner.
2. Adjust the mode to Cool, Fan, or Power Saver.
3. Adjust the fan speed to Turbo, High, Low, or Auto.
4. Adjust temperature between 64°F and 86°F (18°C and 30°C).
5. Turn off the air conditioner.
6. Press TIMER. Timer indicator light on the air conditioner
control panel will flash.
7. Press the plus or minus button to change delay time from 1 to
24 hours.
8. Press TIMER again or wait 10 seconds. Timer indicator light
on the air conditioner control panel will remain on.
Wait three minutes before restarting
LOW
COOL
FAN HIGH
ONLY,
TURBO
WARMER COOLER_
TEMPERATURE AIRSWING FAN SPEED
1. Set vent control. See "Vent Control (on some models)."
2. Select the fan speed. See "Fan Speed."
3. Set temperature. See "Temperature."
Vent Control (on some models)
Set the Vent control to CLOSE for maximum continuous cooling.
The Vent control set to OPEN allows you to draw stale or smoky
air from the room.
• Open--to exhaust room air to the outside.
• Close--to circulate room air.
Fan Speed
Set Fan Speed to the desired setting. When the air conditioner is
operating at Turbo Cool, High Cool, or Low Cool, the fan
circulates air continuously.
• Turbo Cool--for maximum cooling
• High Cool--for normal to maximum cooling (depending on
model)
• Low Cool--for sleeping comfort
• Fan Only--to move air continuously without cooling
LOW
COOL
FAN HIGH
ONLY
TURBO
Temperature
Turn the TEMPERATURE control to a mid-setting. Adjust the air
conditioner's performance by turning the Temperature control
clockwise for maximum cooling. For less cooling, turn the
TEMPERATURE control counterclockwise. Experiment to find the
setting that suits you best.
WARMER COOLER
NOTE: The Vent control will function only when the Fan Speed is
operating.
14