Turning Beeper Off; Maintenance; N Replacing The Battery; Replacing The Test Leads - Fluke 12 User Manual

Hide thumbs Also See for 12:

Table of Contents

12 Multimeter

TURNING BEEPER OFF

To disable all beeper functions, press and hold down [Z] for 2 seconds while turning

the meter on.

WWarning

To avoid electrical shock or damage to the meter, do not get water inside the

case. Remove the test leads and any input signals before opening the case.

Periodically wipe the case with a damp cloth and detergent. Do not use abrasives or

solvents.

The meter uses a 9 V battery (NEDA 1604 or IEC 6F22). To replace the battery,

remove the four screws from the back of the meter and lift off the front. Remove the

battery from case bottom.

The meter uses double-insulated test leads. When replacing the test leads, order

Fluke PN 855742 only.

Table of Contents

Show Quick Links

Table of Contents