Adjust Scale
The scale of the vector in the vector diagram is adjustable.
1. To automatically optimize the scale of the graph, press function key Default.
The scale is set to the measurement range.
2. To change the scale of the axes, press function key Scale U or Scale I.
3. Adjust the scale using the cursor keys up and down, then press Enter to confirm
or Esc to exit.
Oscilloscope Curves
The digital oscilloscope function (DSO) allows for display of signals in curves, so that
signal distortions are quickly detected.
View Oscilloscope Display
1. Press measuring keys Σ or 1...n and WAV to call up the desired values, for
example values measured at channels 1.
2. Press measuring key Oscilloscope curves.
The measured values are shown in the form of oscilloscope curves.
3. To view the details regarding a measured value, press function key Detail.
The display shows the measured voltage.
8
Measuring Process
Change View Mode
esn047.gif
8-17