Fluke 725 User Manual page 19

No Name
Pressure module
connector
,
MEASURE V, mA
terminals
TC input/output
,
SOURCE/ MEASURE
V, RTD, Hz,
terminals
,
SOURCE/ MEASURE
mA terminals, 3W, 4W
Table 3. Input/Output Terminals and Connectors
Connects the calibrator to a pressure module or the calibrator to a PC for a remote
control connection.
Input terminals for measuring voltage, current, and supplying loop power.
Terminal for measuring or simulating thermocouples. This terminal accepts a miniature
polarized thermocouple plug with flat, in-line blades spaced 7.9 mm (0.312 in) center to
center.
Terminals for sourcing or measuring voltage, resistance, frequency, and RTDs.
Terminals for sourcing and measuring current, and performing 3W and 4W RTD
measurements.
Getting Acquainted with the Calibrator
Description
9