Range Hood Use - Whirlpool UXT2030AYB0 Installation Instructions And Use & Care Manual

1. Install the75W (max.) Incandescent light b ulb. S ee 3. Check t heoperation oftherange h ood fanandlight. S ee
"Replacing theIncandescent Light B ulb" s ection. "Range H ood Use" s ection.
2. Replace grease f ilterifremoved. See the"Range H ood Care" If range h ood does notoperate, check t osee whether a
section, circuit b reaker has tripped ora household fuse hasblown.
Disconnect power andcheck wiring connections.
NOTE: Togetthemost e fficient usefrom yournew range h ood,
read the"Range H ood Use" s ection.
RANGE HOOD USE
The range hood is designed to remove smoke, cooking vapors
and odors from the cooktop area. For best results, start the hood
before cooking and allow it to operate several minutes after the
cooking is complete to clear all smoke and odors from the
kitchen.
The hood controls are located on the top of the range hood.
A
B C
A. Incandescent light housing and cover
B. Filter retainer
C. Grease filter
Off
On@Off LOW@ High
A B
A. Qn/Qff light switch
B. Fan speed switch
Operating the light
Push the light switch to the right to turn the light Off. Push the
light switch to the left to the turn the light On.
Operating the fan
Push the fan switch to the left for Low speed. Push the fan switch
to the right for High speed. Push the fan switch to the middle for
Off.
10