General Cleaning - Whirlpool RBD245PRS02 Use & Care Manual

Table of Contents

Advertisement

Available languages

Available languages

To Self-Clean:
Before self-cleaning,
make sure the door is closed completely or
it will not lock and the cycle will not begin.
1. Press AUTO CLEAN.
2. Press the HOUR "+" or "-" keypads to set a clean time other
than 3 hours 30 minutes. The clean time can be set between
2 hours 30 minutes and 4 hours 30 minutes.
3. Press START.
The oven door will automatically
lock, and "LOCKED" will
appear on the oven display. The door will not unlock until the
oven cools.
4=
When the cycle is complete and the oven cools, "End" will
appear on the oven display, and "LOCKED" will disappear.
Press UPPER OFF/CANCEL,
LOWER OFF/CANCEL or OFF/
CANCEL or open the oven door to clear the oven display.
To Delay Start Self-Clean:
Before delay starting Self-Clean, make sure the clock is set to the
correct time of day. See "Clock" section. Also, make sure the
door is closed completely
or it will not lock and the cycle will not
begin.
1. Press AUTO CLEAN.
Press the HOUR "+" or "-" keypad to set a clean time other
than 3 hours 30 minutes. The clean time can be set between
2 hours 30 minutes and 4 hours 30 minutes.
2.
3.
4=
5=
Press STOP TIME.
Press the HOUR and MIN "+" or "-" keypads to enter the time
of day to stop.
Press START.
The start time is automatically
calculated and displayed.
The door will lock automatically,
and "LOCKED" and "DELAY"
will appear on the display. The door will not unlock until the
oven cools.
When the start time is reached, the oven will turn on
automatically.
When the cycle is complete and the oven cools, "End" will
appear on the lower oven display and "LOCKED" will
disappear.
Press any pad or open the oven door to clear the oven
display.
To Stop Self-Clean
anytime:
Press UPPER OFF/CANCEL,
LOWER OFF/CANCEL or OFF/
CANCEL. If the oven temperature is too high, the door will remain
locked. It will not unlock until the oven cools.
IMPORTANT: Before cleaning, make sure all controls are off and
the oven is cool. Always follow label instructions
on cleaning
products.
Soap, water and a soft cloth or sponge are suggested first unless
otherwise noted.
STAINLESS
STEEL (on some models)
Cleaning
Method:
Rub in direction of grain to avoid damaging.
Stainless Steel Cleaner & Polish Part Number 31464 (not
included):
See "Assistance
or Service" section to order.
Liquid detergent or all-purpose
cleaner:
Rinse with clean water and dry with soft, lint-free cloth.
Vinegar for hard water spots
To avoid damage to stainless steel surfaces, do not use soap-
filled scouring pads, abrasive cleaners, Cooktop Polishing
Creme, steel-wool
pads, gritty washcloths
or some paper towels.
OVEN DOOR EXTERIOR
Cleaning Method:
Glass cleaner and a soft cloth or sponge:
Apply glass cleaner to soft cloth or sponge, not directly on
panel.
All-Purpose Appliance Cleaner Part Number 31662 (not
included):
See "Assistance
or Service" section to order.
CONTROL
PANEL
Cleaning Method:
Glass cleaner and soft cloth or sponge:
Apply glass cleaner to soft cloth or sponge, not directly on
panel.
All-Purpose Appliance Cleaner Part Number 31662 (not
included):
See "Assistance
or Service" section to order.
Do not use abrasive cleaners, steel-wool pads, gritty washcloths
or some paper towels. Damage may occur.
OVEN CAVITY
Do not use oven cleaners.
Food spills should be cleaned when oven cools. At high
temperatures,
foods react with porcelain and staining, etching,
pitting or faint white spots can result.
Cleaning
Method:
Self-Cleaning
cycle: See "Self-Cleaning
Cycle" first.
11

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents