Download Print this page

Troubleshooting - Whirlpool SF387LEGN1 Use & Care Manual

Self-cleaning super capacity 465 with accubake system 4.65 cubic foot oven
Hide thumbs

Advertisement

TROUBLESHOOTING
Most
cooking
problems
often are caused
by little things
you can find and fix without
tools
of any
kind. Check
the lists below
and on the next page before
calling
for assistance
or service.
If you
still need help, see "Requesting
Assistance
or Service"
on page 31.
PROBLEM
CAUSE
Nothing works
• The range is not plugged into a properly grounded outlet (120v polarized).
• The range is not properly connected to the gas supply. Contact a designated
service technician to reconnect the range to the gas supply. (See the Installa-
tion Instructions.)
• You have blown a household fuse or tripped a circuit breaker.
PROBLEM
CAUSE
The burner fails to light
• The control knob is not set correctly. Push in the control knobs before turning
them. Make sure the control knob is turned to the Light position. (See page 6.)
• You have blown a household fuse or tripped a circuit breaker.
• The burner ports may be clogged. Clean them with a straight pin. (See page 26.)
The burner flames are
• The burner ports may be clogged. Clean them with a straight pin. (See page 26.)
uneven
• The burner caps may not be positioned properly. (See page 26.)
The burner flames lift off
• The burner needs cleaning. (See pages 25 and 26.)
the ports, are yellow, or
• The air/gas mixture is incorrect. Contact a designated service technician to
are noisy when turned off
check the air/gas mixture or see the Installation Instructions.
The burner makes a
• The burner is wet from washing. Let it dry.
popping noise when on
29

Advertisement

loading

  Related Manuals for Whirlpool SF387LEGN1