Table of Contents
Advertisement
USINGYOUR DRYER
Explosion Hazard
Keep flammable materials and vapors, such as
gasoline, away from dryer.
Do not dry anything that has ever had anything
flammable on it (even after washing).
Failure to follow these instructions can result in
death, explosion, or fire.
Fire Hazard
No washer can completely remove oil.
Do not dry anything that has ever had any type of
oil on it (including cooking oils).
Items containing foam, rubber, or plastic must be
dried on a clothesline or by using an Air Cycle.
Failure to follow these instructions can result in
death or fire.
Starting Yore"Dffer
Before using your dryer, wipe the dryer drum with a damp cloth to
remove dust from storing and shipping. The following steps
provide an overview for operating your dryer. More detailed
information is contained in the following sections.
1. Load clothes loosely into the dryer and close the door. Do not
pack the dryer. Allow space for clothes to tumble freely.
2.
Turn the Cycle Control knob to the recommended
cycle for
the type of load being dried. Use the Energy Preferred
Automatic
Setting (*) to dry most mediumweight
and
heavyweight
loads. See "Drying, Cycle and Temperature
Tips."
3. Select a Temperature setting. See "Temperature Settings."
4. (OPTIONAL STEP) Set the WRINKLE SHIELD
TM
Plus selector
to the desired setting. See "Additional
Features."
5. (OPTIONAL STEP) Set the End of Cycle Signal to the desired
setting. The signal is helpful when drying permanent press or
synthetics. Promptly remove these items from the dryer at the
end of the cycle to prevent wrinkles.
6.
Push the START button.
Stoppingand Restarting
You can stop your dryer anytime during a cycle.
To stop your dryer
Open the dryer door or turn the Cycle Control knob to Off.
NOTE: The Cycle Control knob should point to an Off area when
the dryer is not in use.
To restart your dryer
1, Close the door,
2. Select a new cycte and temperature (if desired).
3. Push START.
7
Advertisement
Table of Contents
