Advertisement
5.
/
!/
IIS J
Remove the inlet filter from
the suction tube and place
it into waste container.
6.
Thread pump cleaning
adapter onto garden hose.
Thread suction tube fitting
over the adapter.
7. Unctip the return tube from the suction tube
and place it into the waste container.
Turn
the PRIME/SPRAY
knob to PRIME.
8.
Turn the water supply to the garden hose on.
Turn the pump ON. Water will go into the
suction tube and out through the return tube.
Let the pump run for a few minutes, and
leave pump running for next steps.
9. Point the spray gun at the side of
a waste container.
10. While squeezing the trigger, turn the
PRIME/SPRAY
knob to SPRAY -
MINIMUM PRESSURE.
11. Continue squeezing the trigger
until fluid is coming out clear.
12. Perform Pressure Relief
Procedure_, page 7.
17
Advertisement
