Download Print this page

Setting Warmer Drawer Controls (If Equipped) - Frigidaire MEF361BHDB Owner's Manual

Ceramic glass cooktop radiant surface elements electronic oven control - esi or esii self cleaning oven feature
Hide thumbs

Advertisement

Setting Warmer Drawer
Controls (if
equipped)
Use the warmer
drawer
to keep hot
foods hot such as: vegetables, gravies,
meats, casseroles, biscuits and rolls,
pastries and heated dinner plates.
The warmer drawer is equipped with a I
catch which
may require extra force
when open ng and cos ng the drawer.
OFF
HI
LO
WARM & SERVE
DRAWER
Warmer
Drawer Recommended
Food Settings
Chart
Food Item
Setting
Roasts (Beef, Pork, Lamb)
MED
Pork Chops
HI
Bacon
HI
Hamburger
Patties
HI
Poultry
HI
Gravies
MED
Casseroles
MED
Eggs
MED
Fried Foods
HI
Vegetables
MED
Pizza
HI
Biscuits
MED
Rolls, soft
LO
Rolls, hard
MED
Pastries
MED
Empty Dinner Plates
LO
Arranging
Warmer
Drawer
Rack Positions
The rack can be used in 2 ways:
In the upright
position
to allow low profile food items to be placed both
under and on top of the rack (for example, rolls or biscuits on top of the
rack and a casserole dish under).
In the downward
position
to allow you to place light weight food items
and empty dishware (for example, rolls or pastries and dinner plates).
Set the warmer drawer rack as shown below.
Upright Position
Downward
Position
To Operate
the Warmer
Drawer
Your range is equipped with a warmer drawer. The purpose of the warmer
drawer isto keep hot cooked foods at serving temperature.
Always start with
hot food. It is not recommended
to heat cold food
in the warmer
drawer.
All food placed in the warmer drawer should be covered with a lid or aluminum
foil to maintain quality. Do not use plastic wrap to cover food, Plastic may
melt onto the drawer
and be very difficult
to clean.
Use only dishware,
utensils and cookware recommended
for oven use in the
warmer drawer.
[Ir_ll2_r_Tj_
Always use potholders or oven mitts when removing food from
the warmer drawer as cookware and plates will be hot.
To Set the Warmer
Drawer
Thermostat
Control
The thermostat control is used to select the temperature of the warmer drawer.
It is located on the control panel. To set the thermostat,
push in and turn the
knob to the desired setting.
The temperatures
are approximate,
and are
designated by HI, MED and LO.
1.
Turn the knob to select the desired temperature
setting.
2.
For best results, preheat the drawer before adding food. An empty drawer
will preheat in approximately
1 5 minutes.
3.
Turn the thermostat
control to OFF after use.
Temperature
Selection
Refer to the chart in the side column for recommended settings. If a particular
food is not listed, start with the medium setting. If more crispness is desired,
remove the lid or aluminum
foil.
Most foods can be kept at serving temperatures
by using the medium setting.
When a combination
of foods are to be kept warm (for instance, a meat with
2 vegetables and rolls), use the high setting.
Refrain from opening the warmer drawer while in use to eliminate loss of heat
from the drawer.
Indicator
Light
The indicator light is located below the thermostat
control. It turns on when
the control is set, and stays on until the control is turned
off. The warmer
drawer is inoperable
during the self-clean cycle. The indicator
light will not
come on during the self-clean cycle.
8

Advertisement

loading

  Related Manuals for Frigidaire MEF361BHDB

This manual is also suitable for:

Mef361bhwb