Solutions to Common Dishwashing Problems
Tea and coffee can stain cups. Remove the
stains by hand washing
in a solution
cup (120 ml) bleach and one quart (1 L) of
warm water. Rinse thoroughly.
in water can cause a yellow or
brown film. A special filter installed
water supply line will correct this problem.
Spots and Film.)
utensils can leave gray/black
marks when they rub against other items.
high acid foods can cause
steel and plastics
if allowed to sit for a long period. Use the
cycle or rinse by hand if not
steel and silver utensils in
basket can cause pitting of the
steel blades. Avoid mixing
steel and silver.
• Using too much detergent in soft or softened
water causes this film that cannot be
• Adjust the amount of detergent
based on the
• Lower the water temperature.
• Use the Cool Dry option.
Left in Cups
may be old. Discard and use
• Be sure water action can reach the
• Check to see if cycle has been completed.
• Make sure items do not prevent the
Use only fresh detergent
carefully. Try a different brand.
Spilled rinse aid can cause foam and lead
Wipe up any spills with a
Check to see that dishwasher
is level. (See
You Will Hear
• Normal sounds include water fill, water
circulation and motor sounds.
There is a noticeable
change in sound
when the wash action switches
lower and middle spray arm. This is normal
since each spray arm has its own sound.
It is normal for dishwasher
to pause (no
sound) when the wash action is switching
between the lower and middle spray arms.
Water in Bottom of Tub
Water left in bottom of tub after cycle is
is not normal. If water remains in
the bottom of the tub, dishwasher
be draining properly. (See Dishwasher
Not Drain Properly.)
• Water vapor escapes from the vent during
the washing and/or drying part of cycle. This
Check to see if circuit breaker is tripped or if
a fuse is blown.
Make sure water supply is turned on.
Check to see if cycle is set correctly. (See
Make sure door is closed and latched.