Using The Remote Control; Preparing The Remote Control For Use; Instaliing The Remote Control Batteries; Using The Remote Control With A Cable Tv Converter/Satell - Toshiba 27AFX54 Owner's Manual

÷
Using the remote controR
Preparing the remote control for use
With the remote control, you can operate your TV, most cable TV
converters/satelIite receivers, VCR and DVD player models together,
even if they are different brands. If you will be using your TV with a
Toshiba satellite receiver, VCR or DVD player, your remote control is
already programmed and ready to use. If you own different brands of
cable TV converters/satelIite receivers, VCRs and/or DVD players, you
first have to program your remote control. (See "Programming the
remote control for use with a cable TV converter/satellite receiver, VCR
or DVD player" on page 12.)
_nstaHing the remote controm batteries
To install the batteries:
1. Open the battery cover on the back of the remote control.
2. Instali two "AA" size batteries. Match the + and - signs on the
batteries to the signs on the battery compartment.
3. Close the battery cover on the remote control until the lock snaps.
Note:
-RTeTV remote control may or may not
receiver, VCR or D VD player. Refer to the
owner's manuals supplied with the equipment
to see which features are available, in
addition, the original controllers may have
features not avaifab/e on this remote control.
If you would like to continue to use these
features, you may want to use the original
remote control
Cautions:
, Dispose of batteries in a designated
disposal area. Do not throw batteries into a
fire.
, Do not mix battery types or combine used
batteries wit,# new ones.
, Remove dead batteries immediately to
prevent battery acid from leaking into the
battery compartmenL
, If you do not intend to use the remote control
for a tong time, remove the battedes.
Using the remote contro_ with a cable TV converter/satellite receiver, VCR or OVO player
To controm a cabBe TV
converter/satellite
receiver:
Program the remote
control to recognize the
brand of your cable TV
converter/satellite
receiver (see "Program-
ming the remote control
for use with a cable TV
converter/satellite
receiver, VCR or DVD
player" on page 12.) The
buttons shown at right will
control the cable TV
converter/satellite
receiver.
Set the TV o CBL/
SAT oVCR oDVD
selector to "CBL/SAT"
first.
Input (TV)
Power
Channel
Numbers
CH Enter
Pic Size (TV)
TV, CBL/SAT,
VCR, DVD
seJector
Channel A'V
Volume ,AV (TV)
Mute (TV) --
TV/VCR --
Light --
right will then control
the VCR.
Set the TV • CBL/
SAT oVCR/DVD
selector to "VCR" first.
To controm a VCR:
Program the remote Input (TV)--
control to recognize Power-
the brand of your VCR
(see "Programming the Channel-
remote control for use Numbers
with a cable TV
converter/satellite CH Enter
Pic Size (TV) --
receiver, VCR or DVD
player" on page 12.)
The buttons shown at Volume A_" (TV)--
TV oCBL/SAT
, VCR, DVD -
selector
Channel _.V-
Mute (TV)-
VCR controls --
Light --
11
3N11601A/E P07-17
÷
1/19/04, 6:01 PM