the metal lathe is used to remove material from
a rotating workpiece, which is held in place on
the spindle with a chuck or faceplate. the cutting
tool is mounted on the carriage or tailstock and
moved against the spinning workpiece to perform
typical metal lathe cutting operations include fac-
ing, turning, parting, drilling, reaming, grooving,
knurling, and threading. there are a wide variety
of tools and workpiece holding devices available
for each of these operations.
Models g0602 and g0752 both require setting
gearbox dial positions and positioning V-belts to
select the spindle speed. however, the Model
g0752 features an electronic variable-speed con-
trol and digital rpM display that make it possible
to select speeds within the selected range while
the machine is running.
We stand behind our machines. If you have
any questions or need help, use the information
below to contact us. Before contacting, please get
the serial number and manufacture date of your
machine. This will help us help you faster.
Grizzly Technical Support
1203 Lycoming Mall Circle
Muncy, PA 17756
Phone: (570) 546-9663
We want your feedback on this manual. What did
you like about it? Where could it be improved?
Please take a few minutes to give us feedback.
Grizzly Documentation Manager
P.O. Box 2069
Bellingham, WA 98227-2069
Model G0602/G0752 (Mfg. Since 11/12)
We are proud to provide a high-quality owner's
manual with your new machine!
We made every effort to be exact with the instruc-
tions, specifications, drawings, and photographs
contained inside. sometimes we make mistakes,
but our policy of continuous improvement also
means that sometimes the machine you receive
will be slightly different than what is shown in
if you find this to be the case, and the difference
between the manual and machine leaves you
confused about a procedure, check our website
for an updated version. We post current manuals
and manual updates for free on our website at
Alternatively, you can call our technical support
for help. Before calling, please write down the
manufacture date and serial number stamped
into the machine id label (see below). this infor-
mation helps us determine if updated documenta-
tion is available for your machine.