Sound Menu; Changing The Preset Sound Mode; Adjusting Sound Settings; Sound Settings - Samsung LN46C750 User Manual

Basic Features
Supported formats and operating specifications for HDMI 1.4
1920xl 080p@24Hz x 2 1920x2205p@24Hz
1280x720p@60Hz x 2 1280xl 470p@60Hz
The mode is automatically switched to 3D mode for the 3D
video input in one of the formats above.
For the HDMI 1.4@24Hz format, the TV is optimized as
follows:
Resolution First Display Mode: If Auto Motion
Plus is set to Off, Clear or Standard, you can
watch the video at a high resolution optimized to the
resolution of the source video.
Judder Reduction Display Mode: When Auto
Motion Plus is set to Smooth or Custom, you can
watch a smooth picture without judder.
Before using 3D function...
NOTE
You may notice a small amount of screen flickering
when watching 3D images in poor light conditions
(from a strobe light, etc.), or under a fluorescent lamp
(50Hz - 60Hz) or 3 wavelength lamp. If so, dim the
light or turn the lamp off.
* 3D mode is automatically disabled in following cases:
when changing a channel or the input source, or
accessing Media Play or Internet@TV.
Some Picture functions are disabled in 3D mode.
* PiP is not supported in 3D mode.
* 3D Active Glasses from other manufacturers may not
be supported.
* When the TV is initially powered on, may take some
time until the 3D display is optimized.
* The 3D Active Glasses may not work properly if there
is any other 3D product or electronic devices turned
on near the glasses or TV. If there is a problem, keep
other electronic devices as far away as possible from
the 3D Active Glasses.
* Photos of Media Play are shown in "2D --_3D"
mode only.
* If lying on your side, the 3D-effects may not be
displayed.
* Be sure to stay within the viewing angle and optimum
TV viewing distance when watching 3D pictures.
Otherwise, you may not be able to enjoy proper
3D effects.
* If the TV Emitter becomes disconnected due to
either a change in the viewing angle or distance,
the 3D Active Glasses turn off automatically after
30 seconds. If this occurs, the red LED blinks three
times.
Picture Reset (OK / Cancel )......................................................
Resets your current picture mode to its default settings.
Changing the Preset Sound Mode
[_ MENU rlTI --_ Sound --_SRS TheaterSound -+
ENTER I_
SRS TheaterSound
Ill Standard: Selects the normal sound mode.
Ill Music: Emphasizes music over voices.
Ill Movie: Provides the best sound for movies.
Ill Clear Voice: Emphasizes voices over other sounds.
Ill Amplify: Increase the intensity of high-frequency sound
to allow a better listening experience for the hearing
impaired.
Adjusting sound settings
[_ MENU iTrl _ Sound _ Equalizer _ ENTERI__
Equalizer .........................................................................................
Adjusts the sound mode (standard sound mode only).
Ill Balance L/R: Adjusts the balance between the right and
left speaker.
Ill 100Hz / 300Hz / 1KHz / 3KHz / 10KHz (Bandwidth
Adjustment): Adjusts the level of specific bandwidth
frequencies.
Ill Reset: Resets the equalizer to its default settings.
Sound Settings
SRS TruSurround HD (Off / On) .............................
(standard sound mode only)
This function provides a virtual 5.1 channel surround sound
experience through a pair of speakers or headphones using
HRTF (Head Related Transfer Function) technology.
SRS TruDialog (Off / On)
(standard sound mode only)
This function allows you to increase the intensity of a voice
over background music or sound effects so that dialog
canbe heard more clearly.
0 English