Using Automatic Picture Settings - Samsung LN-T4665F Owner's Instructions Manual

Picture Control
Using Automatic Picture Settings
Your TV has Three automatic picture settings ("Dynamic", "Standard", "Movie") that are preset at the factory.
You can activate either Dynamic, Standard, Movie by making a selection from the menu.
1. Press the MENU button to display the menu.
Press the ENTER button, to select "Picture".
2. Press the ENTER button to select"Mode".
Press the A or V buttons to select the "Dynamic", "Standard" "Movie" picture
setting. Press the ENTER button.
3,
ChooseStandardfor thestandard factorysettings.
* ChooseMoviefor a naturalImagewithoutpictureenhancements.
Press the A or _' buttons to select "Contrast", "Brightness", "Sharpness",
"Color", or "Tint(G/R)", then press the ENTER button.
4,
Press the 4 or _ buttons to decrease or increase the value of a particular item.
For example, if you select "Contrast", pressing the I,. button increases it.
Press the ENTER button.
Press the EXIT button to exit.
>- • When you make changes to Contrast, Brightness Sharpness, Color, Tint(G/R)
the OSD will be adjusted accordingly.
• When in PC mode, Tint Sharpness, and Color are not available.
{_: Press the P.MODE button on the remote control repeatedly to select the desired
picture mode.
- _ L2 L9
_MO3E SMODE STILL