To Select The Source; To Edit The Input Source Name - Samsung LN-T4665F Owner's Instructions Manual

To Select the Source
Use to select TV or other external input sources connected to the TV.
Use to select the input source of your choice.
1. Press the MENU button to display the menu.
Press theA or • buttons to select "tnpul:', then press the ENTER button.
2. Press the ENTER button to select"Source List".
Press the A or _' buttons to select signal source, then press the ENTER button.
:_ When you connect equipment to the LCD, you can choose between the
following sets of jacks: TV, AV1, AV2, S-Video1, S-Video2, Component1,
Component2, PC, HDMI1, HDMI2, HDMI3 on the TV's rear panel.
HDMI1, HDMI2, HDMI3 input can only be setected when the external device is
turned on and connected via HDMt.
>- AV2/S-Video2/HDMt3 is located on the side of the TV.
You can choose only those external devices that are connected to the TV.
I-H
tel Press the SOURCE button on the remote control to view an external signal source. Q _URCE I] I
To Edit the input Source Name
Name the device connected to the input jacks to make your input source selection easier.
1. Press the MENU button to display the menu.
Press theA or T buttons to select "Input", then press the ENTER button.
Press the A or T buttons to setect "Edit Name", then press the ENTER button.
2. Press the A or T buttons to select "AVI", "AV2", "S-Video1", "S-Video2"
"Component1", "Component2", "PC", "HDMtl", "HDMt2", "HDMt3" input jack, then
press the ENTER button.
Press the A or T buttons to select "VCR", "DVD", "D-VHS", "Cable STB",
"HD STB", "Satellite STB", "PVR STB", "AV Receiver", "DVD Receiver",
"Game", "Camcorder", "DVD Combo", "PC", "VOD STB", "TV" input source, then
press the ENTER button.
Press the EXIT button to exit.