Lexmark E260dn Service Manual page 65

Paper jam error codes (200-series) (Continued)
Error Description
233.03 Paper never reached the input sensor, but was detected at the manual feed sensor.
234.01 Duplex sensor covered during warm-up.
235.01 Invalid duplex media
241.00 Paper jam near tray 1.
241.10 Second pick attempt failed from Tray 1
241.12 Second pick from manual feeder, tray 1, or feeder failed when the media was in the source while other sheets
were committed to the paper path.
241.16 Failed to feed from tray 1. Pages in the paper path have been flushed to the output bin.
241.17 MISIDENTIFIED SMALL GAP JAM. Engine detected small gap at the manual feeder sensor, attempted to
open the gap by stopping the feed rolls, trailing edge was seen at the input sensor, manual feeder sensor is no
longer covered.
241.18 MISIDENTIFIED NO GAP JAM. Engine detected no gap at the manual feeder sensor, attempted to open the
gap by stopping the feed rolls, trailing edge was seen at the input sensor, manual feeder sensor is no longer
covered.
241.19 Second pick attempted failed from Tray 1, no pages printed since calling a 241.10 or a prior 241.19.
242.00 Paper jam near tray 2.
242.01 Took too long to ramp up dc feed motor
242.08 Received lots of dc feed interrupts before losing them
242.10 Second pick attempt failed from Tray 2
242.12 Second pick from manual feeder, tray 1, or feeder failed when media was in the source, other sheets were
committed to the paper path.
242.16 Failed to feed from tray 2. Pages in the paper path have been flushed to the output bin.
251.00 Paper jam near the manual feeder.
251.10 Second pick attempt failed from manual feeder.
251.11 Failed to feed from manual feeder. Pages in the paper path have been flushed to the output bin.
251.12 Second pick from manual feeder, tray 1, or feeder failed when media was in the source while the other sheets
were committed to the paper path.
251.19 Media never reached the input sensor from the manual feeder.
4513-220, -230
2-39
Diagnostics information