Verifying The Output Location; Loading Print Media In The Paper Tray - Dell 1100 Laser Mono Printer User Manual

For preprinted paper:
Letterheads must be printed with heat-resistant ink that will not melt, vaporize, or release
hazardous emissions when subjected to the printer's fusing temperature of 205°C (400°F) for 0.1
second.
Ink on letterheads must be non-flammable and should not adversely affect printer rollers.
Forms and letterheads should be sealed in a moisture-proof wrapping to prevent changes during
storage.
Before you load preprinted paper as forms and letterheads, verify that the ink on the paper is
dry. During the fusing process, wet ink can come off preprinted paper.
Do not use Carbonless paper and Tracing paper. Use of these types of paper could result in
chemical smells and could damage your printer.

Verifying the Output Location

The printer has a paper output tray that collects paper face-down, in print order.
NOTE: If you print many pages, the surface of the output tray may become hot. Be careful not to
touch the surface, and especially keep children away from the surface.
NOTE: The paper output tray can hold up to 50 sheets of paper. Remove the pages so that the tray
does not become overloaded.

Loading Print Media in the Paper Tray